972.00 excl. VAT

A large-diaphragm stereo condenser microphone with advanced multi-pattern functions in mono mode



NEVATON MC404 – Stereo Condenser Microphone with advanced Mono-functions


The Nevaton MC404 is a large-diaphragm stereo condenser microphone with advanced multi-pattern functions in mono mode. It features a 28mm dual-diaphragm symmetrical transducer, giving the microphone a fixed stereo-width of 180°. Each diaphragm has its own dedicated amplifier channel.  It performs especially well, when the sound-source is grouped around the microphone – Great results with choir recordings, string-ensemble, acoustic guitar and vocals(…)

In Mono mode infinite directional patterns can be created (omni, cardioid, wide-cardioid, hyper-cardioid, figure-8 – and everything in between!). A console or DAW can combine the two cardioid signals to produce any desired pattern, so the recording engineer can tweak the pattern to fit the exact needs!


  • Omni – both capsules at equal gain, in phase
  • Wide Cardioid – rear capsule 10dB lower than front, in phase
  • Cardioid – front capsule only
  • Hypercardioid – rear capsule 10dB lower than front, out of phase
  • Figure 8 – both capsules at equal gain, out of phase


The ultra-thin gold-coated diaphragms are made of polyethylene-terephthalate film and give the MC404 a warm, brilliant, and transparent sound. It has excellent transient response, a low self-noise level of only 8 dB-A, and the ability to handle very high sound pressure levels up to 142dB. All capsule components have passed a special artificial ageing process to guarantee long-term stability. The internal construction is elastically mounted to attenuate handling noise. Additionally, the capsules are fixed on special shock absorbers to further reduce noise.

 After trying the two mics (Sanken CUW-180&Nevaton MC404) on a few sources, including grand piano, classical guitar and acoustic steel string, I realized that I essentially couldn’t hear a difference between the mics (Slau Halatyn, Nevaton-review at

The amplifiers are Class ‘A’  transformerless designs utilizing input transistors hand-selected for minimal noise. A switchable low-cut filter
is provided to reduce low frequency interference and/or proximity effects. The MC404 performs especially well when the sound source is grouped around
the microphone. It operates on 48V phantom power. A small LED indicates front position and shows when phantom powering is active. The microphone
body is made of brass with a grey non-reflective paint finish on an epoxy base. This makes it inherently immune to mechanical and atmospheric influences. A 3-layer metallic grille effectively protects the transducers from mechanical impacts and contamination by microscopic dust particles. A gold-plated 5-pin XLR connector is used for output, and a breakout cable (to dual 3-pin XLR connectors) is included.
Each Nevaton microphone is supplied with a printout of it’s individual frequency response, and comes in a fine hardwood box. An isolation clip is also provided.

Freq charts (click to enlarge) 



NEVATON MC 404 – Technical Data

Capsule diameter
28 mm
Directional pattern
Stereo: 180° 2x cardioid
Mono: fully variable – omni, cardioid, wide-cardioid, hyper-cardioid, figure-8
20 – 20.000 Hz

Free Field Sensitivity at 1000 Hz and 1000 Ω

14 mV/Pa
Equivalent SPL DIN/IEC 651
8 dB-A
Max. Sound Pressure Level [for THD 0,5% ]
142 dB
Dynamic range
134 dB
Nominal Impedance
50 Ω

Recommended Load Impedance

1000 Ω
Current Consumption
10 mA
Supply voltage
48 V
head: 50mm, body: 30mm
175 mm
310 g
Relative humidity
90% (at + 20°C)
Connector Type
5-pin XLR-type (male) to 2x 3-pin XLR-type standard
Pin assignment:

pin1: ground, pin2:phase(+), pin3:phase(-), pin4:phase(+), pin5:phase(-)